![Huawei Huawei](/uploads/1/2/5/8/125824874/475723858.jpg)
Connection software required to use Mobile Unlimited Huawei modems E303, E3276, E3531 and E3372 and in notebooks with built-in WWAN modules.
sudo usb_modeswitch -W -I -v 12d1 -p 1f01 -M 55534243123456780000000000000011063000000100010000000000000000
Taking all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.3 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1f01
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
TargetProductList='
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent='55534243123456780000000000000011063000000100010000000000000000'
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check disabled
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_devices: Found 010 on 001
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
Looking for default devices ...
searching devices, found USB ID 12d1:1f01
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0424:ec00
searching devices, found USB ID 0424:9512
searching devices, found USB ID 1d6b:0002
Found device in default mode, class or configuration (1)
Accessing device 010 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: FFFFFFFFFFFFFFFF
-------------------------
Looking for active driver ...
OK, driver found ('usb-storage')
OK, driver 'usb-storage' detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.
Taking all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.3 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1f01
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
TargetProductList='
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent='55534243123456780000000000000011063000000100010000000000000000'
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check disabled
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_devices: Found 010 on 001
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
Looking for default devices ...
searching devices, found USB ID 12d1:1f01
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0424:ec00
searching devices, found USB ID 0424:9512
searching devices, found USB ID 1d6b:0002
Found device in default mode, class or configuration (1)
Accessing device 010 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: FFFFFFFFFFFFFFFF
-------------------------
Looking for active driver ...
OK, driver found ('usb-storage')
OK, driver 'usb-storage' detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.